尺寸：20*30MM
WIEGAND26 + RS232 输出接口
LED+蜂鸣器输出接口
HM08-WR is HID compatible reader module with two kinds output format, they are Wiegand and RS232. Once card is detected by module, data will be send out on the different output pin.
Specification
Size 20mm *30 mm
Power requirements Max. 5V DC at 100 mA
interface Weigand26 for connection to standard access control panels + RS232 interface
Reader range Min. 6 cm and upto 10cm with standard HID ProxCardII(depends on different antenna siz)
Frequency 122-128KHz
Operation temperature -30 C to +60 C
operationg humidity 5%-95% relative humidity non-condensing
Audio/Visual Indication N/A
Response Time Less than 0.2 sec
Antenna 0.14mm magnetic wire, wired around 110 turns and L=1.16-1.20mH
Application
As a small size moduel to be soldered onto different controller or card reader to add reading HID card function
Wiring drawing
Connect Pin
1 Power 5V
Antenna 2 Power ground
Antenna 3 Wiegand output D0(26 Bit)
4 Wiegand output D1(26 Bit)
5 RS232 format output
RS232 format:
The FUN pin is for RS232, the serial port setting is: 9600, n,8,1
Data format is as below: 0X2,D1,D2,D3,D4,D5,D6,D7,D8,0XD,0X3
Data is transferred with start flag 0X2, then 8 bytes card no# in ASCII code, 0XD+0X3 as end flag.
for example, one card with FC# code FF, and card No# FFFF, at the RS232 output pin, data will be:
0X2 32 35 35 36 35 35 33 36 0XD 0X3 |
|
|
|
|
