Reads Mifare serial number only
Meets ISO14443 TypeA standard
Supported transponders:Mifare Ultralight 512-bit EEPROM/Mifare Classic 1K,4K,8K bytes memory
Full potting for outdoor use, waterproof/or without potting
Size 20mm *30 mm
Power requirements 5V DC at 100 mA
interface Weigand26 for connection tostandard access control panels
Reader range Min. 6 cm and up to 10cm with standard Mifare 1 card
Frequency 13.56Mhz
Operation temperature -30 C to +60 C
operationg humidity 5%-95% relative humidity non-condensing
Audio/Visual Indication Green & Red and Buzzer signal output
LED function: The LED color is normally in RED. It starts with 3 green flashes on power up the reader and remains RED. When a RFID proximity card is present to the reader, The LED will momentary flash green,this indicates that the card was read properly by the reader. When the LED control signal is active, the LED changes to green. The LED control signal is provided by the panel to control the reader LED state
Beeper Function: Power up the reader, the beeper will active three times. When a RFID proximity card is present to the reader, a short beep will be emitter. This indicates that the card was read properly by the reader
|
|
|
|
|
